GetLoFi Delay Unit and Piezo Tine Demo

This is a first demo of the newly revised GetLoFi Delay Kit. The kit
will be available for purchase from GetLoFi.com/shop

The metal tines are mounted on a piece of wood with a Piezo pick
underneath. The signal from the pickup is then routed directly into
the LoFi Delay Unit and the output is routed strait to the audio recorder.

The only controls on the delay unit are Delay Time and Delay Feedback.
Unit turns on when an output cable is inserted. In the demo the unit
is operated by an optional 9 Volt Wall supply.

The delay itself is based on the PT2399 Digital IC, only bare minimum
of components were used to make assembly as simple as possible.
No OP-Amps are present in the circuit.
-circuitmaster